Leshiy #88
After a bit of tuning, here are some numbers I’m happy with…. For now. The gun is very well built and very simple to work on. I’ve had this puppy completely apart with the exception of the magnet portion on the cylinder. :suprisedn:
65 Degrees F
Yes that is important when your working next to a wood stove that heats up the area fast. The pressure will change in this small cylinder pretty quick. :winkn:
245 Bar fill (using the gauge on the gun)
JSB kings 25.4
6 inches from Chronograph.
1. 245 bar 751 fps
2. 233 Bar 750 fps
3. 221 Bar 752 fps
4. 210 Bar 751 fps
5. 199 Bar 748 fps
6. 187 bar 752 fps
7. 175 bar 751 fps
8. 164 bar 754 fps
9. 153 bar 753 fps
10. 141 bar 757 fps
11. 133 bar 756 fps
12. 121 bar 752 fps
13. 114 bar 744 fps
14. 106 bar 724 fps
97 Bar End
All Replies
I am looking forward to see hunting videos with Leshiy in Maine.
I understand where you are coming from but those 2 shots at that pressure were not typical at this current setting. This was just my most current string.
I’m not sure exactly because I haven’t built a testing vessel for it, but it’s probably right around there. I’m about 80 degrees turned from factory setting. My regulator said 130 on it. 60 degrees was giving me too high of numbers. I think my max was 814 fps but it was using a lot of air!
I guess it’s 130 bar because the shot string went up at 141 bar.
with reg set to? Roughly 115 bar I guess?
- You must be logged in to reply to this topic.
I’m finishing up a really short hunt video right now. Stay tuned on the Exziver Channel.
Another way to stay tuned is on my instagram. They usually get the first sneak peak of what I’m up to. :winkn:
https://www.instagram.com/exziver/?hl=en