Visit Talon Tunes
Updated on April 9, 2011
bdurham
Participant
April 9, 2011 at 2:59 pm
Q:

Little help please

I’ve had my Talon apart several times except for the breech. I know I can figure it out but is easiler to just ask questions. What holds the breech in when you take the hammer out. Do you have to take the trigger out? I was wanting to put o-rings in my breech. Thanks, Ben

General Chat

All Replies

Viewing 4 replies - 1 through 4 (of 4 total)

bdurham
Participant
April 9, 2011 at 6:54 pm

Thanks for the help. I should have figured that out myself but it didn’t cross my mind to just pull the trigger. Thanks Guys. Ben

roachcreek
Participant
April 9, 2011 at 4:42 pm

Sometimes you have to put pressure on it with your finger while doing what Condor said.

Regards,

Roachcreek

packrat
Participant
April 9, 2011 at 4:38 pm

The “STICKY” Look here FIRST for Answers about your GUN“…directly above your post , would also have answered that question….LOTS of good info there !! And is available 24-7-365. 😀

07condor22
Participant
April 9, 2011 at 3:34 pm

The sear holds the breech, point down, pull trigger, breech falls out!

Sam 😎

Viewing 4 replies - 1 through 4 (of 4 total)

  • You must be logged in to reply to this topic.