Long term update.
Over 160k pellets through the 22.
Over 100k through the 25.
Still running original orings in regulators.
Finally replaced 22 bolt probe o-rings at 150k just because they looked a little tired but not leaking.
Still holding exceptionally tight fps spread through entire shot string on both and accuracy is still spot on as it always has been.
All Replies
Viewing 4 replies - 1 through 4 (of 4 total)
Hey Charlie …….. long time. ……. hum GREAT GUNS ONLY GETS BETTER WITH AGE. :biggrinn:
No, but when I purchase mines I bought 2 extra stems also.
Only heard if u don’t do a power tune they last for a longtime ………….
~ Greg
Awesome! It’s built like a tank and easy to maintain.
Have you ever replaced the valve stem?
Cool, same here ….. all original O-rings in my 22 std never took it to biz yet.
Changed a the mag O-rings only.
Last year I found the gun empty, it had a leak in the valve O-ring.
Most likely it dried out from all the top filling, so I injected a bit of Silicone lube into the small inner inlet with a syringe then wipe out the main fill port out clean.
Blast top fill and all is good to go, never leak again since.
~ Greg
Viewing 4 replies - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
I have simalar numbers of pellets through my .22 R3 on the original probe o rings too.. have only changed the piston reg oring on that one.
The .25 R3 is getting up in shots now too but seems to eat probe orings.. like a set every 500 shots.. I might machine my probe to ecept 4×1.5mm o oring instead of the tiny 4x1mm orings and see if they last better.