Looking for EDgun pellet holder pics
I know I saw some foam pellet holders mounted on sone guns in the past. Any one still have any pics? Thanks
All Replies
Viewing 10 replies - 1 through 10 (of 10 total)
It holds 48 pellets, not enough for a fill. I get 65-68 regged shots on a 210 bar fill. I had made it 12 rows by 5 tall and it didn’t look right, too tall. Cut off the bottom row. Once I had the materials, it took about 1 1/2 hours to make.
I stuck the level on at the same time. Used clear RTV. In the pic it looks pretty nasty. I need to clean my sloppy ass up! 😆
Industrial/Self adhesive/ Velcro :8
It holds 48 pellets, not enough for a fill. I get 65-68 regged shots on a 210 bar fill. I had made it 12 rows by 5 tall and it didn’t look right, too tall. Cut off the bottom row. Once I had the materials, it took about 1 1/2 hours to make.
I stuck the level on at the same time. Used clear RTV. In the pic it looks pretty nasty. I need to clean my sloppy ass up! 😆
i hear wok does wonders with a sloppy ass 😯
Yep, wire ties, pretty getto huh? 😳 I just finished the holder and was gonna make some brackets but, it was time to go shoot some pigeons. The wire ties have been on there ever since.
It holds 48 pellets, not enough for a fill. I get 65-68 regged shots on a 210 bar fill. I had made it 12 rows by 5 tall and it didn’t look right, too tall. Cut off the bottom row. Once I had the materials, it took about 1 1/2 hours to make.
I stuck the level on at the same time. Used clear RTV. In the pic it looks pretty nasty. I need to clean my sloppy ass up! 😆
Yeah, Thats the one I was thinking of, thats enough pellets for a 200 bar fill. Whats holding it on wire ties maybe?
Here is mine, on my Edgun. It is paid for also. 😀 Waiting for my new long version 25 cal Edgun 🙁
Ahhh, an Ed gun.
You could probably order the standard 20 pellet holder and mount it over the barrel in front of the trigger guard and through those slots. Same deal, get the .325″.
Not the best picture but I think you might be able to get the idea
Here is a good picture…
I use a Philips pellet holder. I get .325″ depth version to ensure my Kodiaks don’t drop out. The line you see was cut by me, not manufacture.
The one you see is a custom order, ask for the following:
* PH N-12-1720 .325 (for 177 / 20)
* PH N-12-2225 .325 (for 22 / 25)
* Additional hole cut in the center
* Patent Pending Label mounted to the back only.
They also do others for the your tank http://www.pelletholder.com/order.htm
Look in the post ” My Edgun is paid for” by Ted a few posts down for mine.
I had a coozy (sp?) around my TSS bottle. Cut it into a strip and velcroed
it on. Mam or Tac has one that is wedged between the barrel and air tank.
Some guys have a small on around their scope tubes.
HTH….Matthew
Viewing 10 replies - 1 through 10 (of 10 total)
- You must be logged in to reply to this topic.
Damn it! I mentioned ass and got crowpopper thinking about Wok again.