Loose trigger cricket – fixing
I fixed my trigger which was loose from factory 🙄 I put another two piece of washers. Washers have to be 3mm and very narrow. Is possible to use some narrow piece of tin-plate and made 3mm hole with drill.
All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
Nice trigger mod Jan, I used 2 nylon washer that I had to sand down the thickness to fit.
Nothing wrong with my Cricket barrels ………. all my Pups group 1/4″ ctc at 50 yards but my Cricket 22 std is the most accurate Bullpup I have beyond 100 yards.
~ Greg
Barrels?? What the hells wrong with the cricket barrel?
They should also fix the barrels.
My is just perfect too. 😀 They should did it in the factory!!!
Yes the early ones were bad. I had John Hagen put a brass bushing in mine. It’s perfect now
Sent from my Z30 using Tapatalk
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
Clever solution Greg 😉