low pressure
i have a condor and have lost the thrill of shooting a .22 pellet at 1250 fps, but anyway i am shooting in the low 900’s with cp’s and shoot from 2500 to 1700 and i have a slightly heaver hammer. but i was thinking of trying to tune my gun for even lower pressure to get more out of my 3000 psi tank (no 4500 fills around here). i am not looking for more power but has anyone had any luck with 1200 to 2000 psi and still get 900 fps with cp’s and a shot curve. just want to know if it is reasonable, or if i will be wasting my time trying.
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
I don’t think you would get 900FPS with fill psi that low but, if you want to try
lower fills you can take the extra hammer weight out of the gun and it will
basically be the same as a Talon or Talon SS except for the huge tank
valve… Keep you eye out for a Talon valve or the whole tank… That would
set you up with a quick swap out solution…
mmmmgh
shooting a 22 @1250 sounds pretty damned good to me
😛 😛 😛 😛 😛 😛 😛 😛
SAW
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
I shoot from 1900-1600, about 15 shots, heavy hammer and spring, tp at 93/thousands, kodiacs 31 grn, 850, 870fps.