M-rod .630 diameter Lothar Walther barrel with FRONT shroud
Hiy Guys,,, does anybody tried this??? http://marmotmilitia.com/store.html this man is advertising the LW barrel for Benjamin Marauder with no changing on your Mrod,,,the gun will remain with factory parts and the LW barrel is modified to be installed just like the factory Mord barrel,,,
i would like to see some one has tried this and let us know about the result and difference between the factory barrel and this custom LW barrel??
thanks,,,
All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
Hemn
Really sucks about the crap going on in the middle east, Looks like your right in the middle of it,, I pray you stay safe,,
Now I got a 25 Marauder I would also like to BP it and put a 500cc bottle on it…
It will also be a while for me as I have a 22 Cricket just bought a 25 cricket , And my Marauder is just way to good of a gun to just give away….
Mike
actually have a big plan to convert my Benji Mrod to BP and putting LW barrel then installing 500cc air reservoir then installing a regulator as well,,, but this will cost me almost +2 Mrod rifles ,,,
and don’t know if this will deserve to spend such big budget or not???
however since i got my Edgun .22cal , i have shot with my Benji Mrod only almost 3 times,,,
and the most resistant point is currently i am moving to my new house and have no enough budget to do all of these,,,and fucking ISIS is spoiled everything in Iraq,,, i need to get all these parts from USA via USPS,,,which is USPS usually going to Baghdad airport then sending each cities shipment ,,, now is war between north and south and west parts in Iraq,,,no shipping way,,, :whistle: :whistle: :whistle: :angrymob:
better to take off all of these from my head and spend times with my Edgun and waiting until then,,,or sell my Benjamin ,, 😯 😯
Thanks guys for your kind inputs ,,,
actually have a big plan to convert my Benji Mrod to BP and putting LW barrel then installing 500cc air reservoir then installing a regulator as well,,, but this will cost me almost +2 Mrod rifles ,,,
and don’t know if this will deserve to spend such big budget or not???
however since i got my Edgun .22cal , i have shot with my Benji Mrod only almost 3 times,,,
and the most resistant point is currently i am moving to my new house and have no enough budget to do all of these,,,and fucking ISIS is spoiled everything in Iraq,,, i need to get all these parts from USA via USPS,,,which is USPS usually going to Baghdad airport then sending each cities shipment ,,, now is war between north and south and west parts in Iraq,,,no shipping way,,, :whistle: :whistle: :whistle: :angrymob:
better to take off all of these from my head and spend times with my Edgun and waiting until then,,,or sell my Benjamin ,, 😯 😯
Yep I did it on my 25. He does some awesome work. One Holer at 50 with almost any pellet u try. Mine is shooting jsb’s at 880 for 16 shots.
Hy Hemn,
I had the Marauder in .22 and can tell you that after I put the barrel LW accuracy increased significantly, otherwise known as the .177 and .022 Crosman barrels have poor quality. I went on the LW version bore outside diameter of 12.1mm and a moderator from HW as shown below:
Hemn-
Several guys on marauder forum have done this. I did the .47 version in my first p-rod, and it cured its pellet fussiness, and a little more accuracy. I know it’s louder due to the reduced shroud volume.
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
My Brother Mike,
Thanks for your very kind words,,, please keep us in your blessed prayers ,,,
actually BP air guns are really very comfortable and have more features comparing to air rifles,,, for Ex; my Edgun Long version has a 59 cm LW barrel,,, if you pur this long barrel on the air rifles you will must either have a very long rifle or if you shorten the rifles then you wont be able to put silencers… also the BP size if very suitable for car hunting ,,,and ,,,and ,,,
why you don’t wait for some more time and get an Edgun .22 or .25 ..or if you are living in USA then you can buy a .30cal (monster hunter) ….
Benjamin is a very good PCP for the price ,, and very accurate,,,, i could got two birds head shot continuously at exact 109 meters with my Marauder .22 ,,,last spring,,, and hundreds head shots between 10 – 50 mtrs (starling hunting) ,,,
but since i got my Edgun last year October ,,,i had shot only 3 or 5 times with my Benji Mrod,,, that is why i want to change it for a BP shape and more air tank capacity ,,, :4:
my Edgun is very accurate and iam very satisfied with it,,, you can find all my activity in this thread http://talonairgun.com/forum/viewtopic.php?f=34&t=27845
i have this vid also if you have time just watch it https://www.youtube.com/watch?v=24fsemBaFIY i have explained all details in the description ,,,
thanks ,,,
Hemn .M