Magazine holder magnet
I have a .25 Kalibrgun Cricket I lost the magnetic in one side of the holder does anyone have a link to a replacement?Thanks in advance.
All Replies
Viewing 4 replies - 1 through 4 (of 4 total)
I believe this is the one u need.
https://www.apexmagnets.com/5mm-x-5mm-cylinders?fee=5&fep=135&gclid=CICCvKT3gMwCFUmRfgodKOID6A
But if u like, PM me your address in the USA and I’ll send u 2 for free with some sticky dots too.
Tip on reinstalling them:
Make sure you have the polarities in the right direction before pushing them in, or they will respell instead.
Also the best way to make them stay in is to use sticky dots.
Just place a small glob onto the end and push the magnet into its hole.
Also a great way to hold the Edgun stock washer in place, it will not come off like if u where to glue it on.
:tag:
~ Greg
I would not recommend china ebay magnets, they are cheap for a reason. I recently (3 days ago) recieved a pack of dirt cheap strong magnets, the magnets literally broke into smaller pieces if you put one on a table and held another one in the air close enough so the one on the table flies up to the other, took about three times or so.
So buy cheap stuff at own risk of them breaking apart once you snap back the mag holder a couple times :2cents:
It’s possible to buy a small neodymium magnet from china for couple of bucks.
With google you can find it suitable dimension.
Viewing 4 replies - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
To the rescue again…great job.