Q:

Mine is bigger than yours

As far as silencers go:

50mm in diameter and 450mm long. Barely enough to make a 220 fpe gun backyard friendly 😆

Other BullPups

All Replies

Viewing 9 replies - 1 through 9 (of 9 total)

quote birdman:

rkr , all fun put aside , that thing is huge . How much overall weight is added to your gun with it ? Does it become more front top heavy
shooting it free style ? Does it need to have a barrel support for shooting to get the best accuracy ? What is the best effective killing
distance with that caliber ? What is your primary use for this gun ? Just curious , thought I would ask .

FROM : THE BIRDMAN

It weighs 630 grams, not the lightest but not the heaviest either. It does make the gun nose heavy now that I have longer barrel installed and I’m actually planning to install a hamster to make it easier to shoot. The gun is mainly used for our bigbore silhouette competitions, we shoot blackpowder silhouettes up to 100M and it takes about 130 fpe to knock down a ram at 100M. The barrel band is indeed needed or the weight of the silencer will cause the barrel to droop few mm. The gun makes about 170 fpe at 100M and 140 fpe at 200M so it has the killing power. However with 50M zero the bullet drops about 25″ at 100M and 90″ at 200M so the practical killing range is a bit over 100M unless I use a range finder.

rkr , all fun put aside , that thing is huge . How much overall weight is added to your gun with it ? Does it become more front top heavy
shooting it free style ? Does it need to have a barrel support for shooting to get the best accuracy ? What is the best effective killing
distance with that caliber ? What is your primary use for this gun ? Just curious , thought I would ask .

FROM : THE BIRDMAN

quote Hoot:

:hoot:

With a moderator almost as long as the gun, it should be very quiet indeed. It must be 2″ thick. The camo wrap sets it off nicely.

When a body needs quiet, a body doesn’t care how long the dang thing is, as long as it works!

Hoot:

It’s actually a reflex silencer and goes only 8″ in front of the barrel – the rest is around the barrel. Goes to show how big cans we need for more powerful airguns to contain the air that comes out.

:hoot:

With a moderator almost as long as the gun, it should be very quiet indeed. It must be 2″ thick. The camo wrap sets it off nicely.

When a body needs quiet, a body doesn’t care how long the dang thing is, as long as it works!

Hoot:

quote iride:

Looks very quite, Mouse 1/2 fart, Its so quite , I forgot I pulled the trigger,
Mike

It would have to a BIG mouse then. Even with the volume this thing has it is not whisper quiet and with the kick it has you know whether you fired or not. Of course if I turn down the power the noise level goes down as well.

Add another 24 inches and it won’t even make a mouse fart at all .

FROM : THE BIRDMAN

Looks very quite, Mouse 1/2 fart, Its so quite , I forgot I pulled the trigger,
Mike

Camo toilet paper is good for environment. As dirt is hard to spot on camo pattern you can re-use that paper several times. Silencers made out of toilet paper are also very light so they do not change the POI.

:hoot:

Holy Crap Batman!!!!

An LDC made out of camo toilet paper…. :suprisedn:

Hoot:

Viewing 9 replies - 1 through 9 (of 9 total)

  • You must be logged in to reply to this topic.