Mo’ power…
Typical “male species syndrome” I guess ya call it……I’m thinking a Condor tank and valve, and hammer would seriously increase power of TSS? Not wanting to go to longer barrel, I like the short, carbine look and feel. What say ye?? who has done this, what info can you give , along with your experience?? I seriously am wanting to do this…before I get too accustomed to stock version, I might as well get it like I want it, then get accustomed too that!!! PLease post any info…ready to do it! wanna get it like I want it before I send it to Tony to get it “tuned”.
All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
I had my Talon SS set up with a condor valve, and it was great. 900+ fps with 16 and 18 grain pellets. But it does use more air than the Talon valve, and for sure a longer barrel would be more efficient.
I am not saying that it is a waste as in don’t do it I’m just saying that a lot of air will go unused because the 12 inch barrel doesn’t have time to use it.
Doubling the power would NOT be a waste of air, no,no,no,no,,NO ! Might have to go to a 88 cuft scba tank..but it would not be a waste! 😀 😀
You should be able to at least double your power with a condor valve…..you will also be wasting lots of air.
Yeah I know, but one of the MAIN things I like about the SS is the short carbine look…hell I can live with power the way it is, just wondering ,how much improvement there would be if I stayed with 12″ barrel?? Ant idea?
Yes, you will get lots more power/fps/fpe. 18″ barrel and above is best.
Happy? 😀 😀 😀 😀 😀 😀 😀 😀 😀 😀 😀 😀 😀
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
I figured “air” would be an issue..I’d probably have to go to a 88cuft 4500 psi tank,which is BIG BUCKS…Have a 100cuft, 3300 psi tank now and it serves me just fine…I’ll stay with stock TSS for now…just this morning I got out and did some more testing..using CR 14.3 hollow points OR RWS 14.5 superdomes,,,with 2800 start psi , PW @ 4.95, I can shoot 64 shots between 780fps and 720fps…down to 2100psi. Start at 2800psi, same 2 pellets, PW @ 7.8, I shot 30 rounds (15 of each pellet) from 870fps down to around 790fps..Anything above that produced NO MORE power..checked @9.0 and 10.0 and 11.0 (which actually shot 3 consecutive shots @720-730) which seems a little odd. Point is I have got 2 settings that are GOOD,,I have 4 more tins of different pellets coming from PA, all heavier than the 2 kinds I’m now shooting..Curious to see what happens.. Both the Crosmans and the RWS’s , shoot consistently, and more important-ACCURATELY….only .2gr. difference in weight…makes them interchangeable…The Crosmans I can buy locally, $9.95 for a tin of 500..I’m diggin’ THAT!!! PA shipping is killing me 🙄