Moly Spray Lube
Tried this out today.
bought this spray on lube from Midway USA for my rimfires bullets couple years ago…
Item# 222645
Anyone used this product..?
Im considering treating my hammer, hammer spring, and pellets…possibly the bore…
Any thoughts…?
All Replies
Viewing 2 replies - 1 through 2 (of 2 total)
I have lubed a few thousand bullets with it.
I does work, but not as well as Silicone oil. Perhaps not quite as messy as silicone oil but still messy.
The advantage Silicone oil has over the Moly spray is it is better for sizing bullets, if you do size.
I keep a can around all the time, I have used it on hammers and bolts.
Regards,
Roachcreek.
Viewing 2 replies - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
No, I haven’t tried it but…
I’d say it kind of depends on where ‘Rite here’ is 🙄
If you use it in dusty or sandy locations, or just shoot a lot and don’t want to have to clean out the gunk that an oil collects, you might be better off using a dry lubricant like a silicon spray in the hammer, hammer spring,trigger area. Otherwise, silicone grease like divers silicone is best for the o-ring areas of the valve and breech.