My 3 Condors
Here they are, .22, .25, and .308. Still have some work to do on the .308. I also have a unchoked barrel and will put together a slug only gun. This one will be regulated. Then there will be the .451.
All Replies
Shroud for .308 started as 2″x.250″ tubing. I turn the OD down to around 1.900″ and then bore the inside so they match. I haven’t found any tubing that is true enough so I machine the inside to match the OD. When finished it will be 1.860″. It is 18.5″ long with 28″ barrel.
I use a Etac to adapt the valve to the tank.
I also need to find something better than a rattle can to paint my tanks with. I have 3 53 ci tanks that are bare aluminum and I would like to redo these flat black to get rid of all the red writing.
Very nice collection.How long is the shroud? Did you cut new threads into the tanks, so you could fit in the big bore valve?
Your right it is close to the length of the .25 what od tubing did u use for your 308 I used 1.725.
Holy Shit………
Nice collection you’ve built there!
Wow!! a shrouded 308, nice.
- You must be logged in to reply to this topic.
“18.5” long with 28″ barrel” WOW. What was the longest range you shot the 308?