All Replies
Is it possible to fill that reg tester with my hill pcp pump?Does it require some sort of special inlet?
My friend stay away from it with a pump. You will blow yourself up. Don’t say I didn’t warn you
Sent from my Z30 using Tapatalk
Eelect nothing wrong with pump. Yesterday I tested with pump and bottle too. It´s works with pump same as with the bottle – no problemo. Just with bottle it is more quicker :biggrinn:
As long as you can set it to where you like Jan, I don’t think it matters if you have 16 or 17 disc inside or even 20. :winkn:
125 bar with 16 disc and 125 bar with 17 disc is still 125 bar ……… 😎
I think it’s the shipment of Belleville spring washer that KalibrGun gets varies somewhat in tension.
Some shipments of them are softer and some harder.
There is a possibility also that out of the 17 disc there is 1 or 2 or even 3 weak ones ?
A big THANKS to Dman/Jaime he did me a real solid more than once even, I couldn’t have done it without him !!
Merry Christmas Jan !
~ Greg
Is it possible to fill that reg tester with my hill pcp pump?Does it require some sort of special inlet?
My friend stay away from it with a pump. You will blow yourself up. Don’t say I didn’t warn you
Sent from my Z30 using Tapatalk
Hello Octavius, i have a stupid question:
Is it possible to fill that reg tester with my hill pcp pump?Does it require some sort of special inlet?
Hohooo Santa coming early
I have some newspaper for reading 😆 Very interested format of newspaper. We don´t have this format for newspaper.
Big thanks to Greg and Jaime !!!!!!
I already set the regulator to 125bar but I can´t check it with shooting because I had the leak on small bleed screw 😡 I don´t know why I couldn’t tighten down. I have wrong (soft) allen key. Tomorrow I must buy new allen key 2,5 in premium quality.
I tried to remove one disc and try how pressure I will get with 16 discs? I got only 110bar 😡 There must be something different in regulators. Then I put one disc back and set pressure properly. So in my cricket doesn’t work with 16 discs 😳 but I do not know why ?
:8: :8:
Very good shooting. That’s out of my league, PCP wise.
Go Jan !!
Thanks Eelect. Both brands are fine Vulcano and Cricket too. It´s important how is gun succeed in the factory and how person seat with the gun. It usually take some time. 😉
50m / CTC 0.39 inches
80m / CTC 0.58 inches
That’s some fine groups you have there. Almost thought they were Ville’s with his Volcano. :suprisedn:
Some shooting from today. Outside only +3°C/37°F 😕
50m / CTC 0.39 inches
80m / CTC 0.58 inches
What did he say?? 😆
I know one thing : The one doesn’t obsolete the other by any means. Both shoot superbly well when fuxed right.
I’ve had several Crickets and regret the sell of my .177 Compactomundo. I will buy another one though. That said i never owned a Cricket in .22. If one shoots as well as my Volcano then there’s no reason to have both in the same cal , of one doesn’t really want to.
Isn’t true? :rofl: I’m sure cricket would be happy to have brother Vulcan. :whistle:
😆 Jan, you are funny. 😀
~ Greg
- You must be logged in to reply to this topic.
Is it possible to fill that reg tester with my hill pcp pump?Does it require some sort of special inlet?
My friend stay away from it with a pump. You will blow yourself up. Don’t say I didn’t warn you
Sent from my Z30 using Tapatalk
Eelect nothing wrong with pump. Yesterday I tested with pump and bottle too. It´s works with pump same as with the bottle – no problemo. Just with bottle it is more quicker :biggrinn:
Jan my friend. You have not quite caught on to good ole USA sarcasm 😎
Merry Christmas
Sent from my Z30 using Tapatalk