my last resort..gonna try .25
well the amount of money and time put into this gun to try to get it consistantly accurate ,just isnt happening.I have decided to buy a .25 barrel,not sure when im gonna get it ,maybe a few weeks.I just dont get it with this gun it will shoot dime sized groups at 50 yards , and then boom open up to almost 2 inches,and im shooting with an e-tac reg set at 1800psi.I also tried a 2300 psi reg to no avail.i do notice when i clean barrel and put fresh breech orings,ill get good accuracy but not for long.even with the 1800psi reg and hammer weight it is spitting the 18.1s at 950-60,with extreme valve.now i noticed ill get a little more accuracy with the weight out and only filled to 2200psi pushing 18.1s at 880,870,but still doesnt last long.i am gonna see what this 25 barrel can do with the 2300 psi and kings,and see what happens.if it still doesnt shoot im gonna drive out to cobraairguns and see if i can trade or sell it,im thinkin air arms s510……
All Replies
If everything is tight
Clean
Aligned
Good trigger technique
Good shouldering technique
Good Pellets
Then I would suspect the scope.
I had gun to the same nonsense and then I figured out if I tapped the turrets of the scope the accuracy would change.
Welcome to Airforce rifles.
RC
i would recommernd cleaning to bare metal, condition the bore and pellets with white lightning the same way youd use krytech.
it has done miracles with quick fouling barrels for me every time, and now i dont know how i did without it…
I am by no means an expert..
But it sure sounds like your barrel is leading up fast. I just ordered an etac/reg combo to help my consistency, so I am sorry to read this did not help yours.
Have you tried a good bore cleaning/polishing wih JB paste or similar?
- You must be logged in to reply to this topic.
You are right, I tried shooting while tapping the turrets and my shots went every where.
There is a lesson here, you do not need to run from a Turret Tapper, he’ll miss every time.