NEW .25 longrange pellets
hi,
Now from the factory( JSB ) that they are going to make the .25 pellet very soon.
not for power crazy boys but for real long range work, weight of the pellets will be around the 26 /27/28 grains.
All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
The biggest tank Ive found is 88cf where did you guys get ones in the 400’s
😯
thanks
Got to love a Zeiss! 😀
We’ll hav to wait and see on the new .25’s. the Air Wolf is way low on power. Much lower than what we’re shooting. 50 yards is kinda short range for us! 😉
Mike
Went to the range yesterday to do some shooting and testing the new JSB .25 pellet at 100meters! The first groups are very promising!
Filled the stealth to 170 bar, 5 shots with Baracuda’s. Used a taped test card for first try! The first group was the smallest of the evening at 33mm
http://www.luchtbuks.net/index.php?act=Attach&type=post&id=48711
Had to wait for everyone to finish their round to look at the target. Rotated the target 180 degrees as the bara’s hit slightly right! But elevation was spot on. That Target turret with the zeiss is still very nice!
http://www.luchtbuks.net/index.php?act=Attach&type=post&id=48712
New round new opportunities and the .25 JSB were next to test. Same fill and again 5 shots. Hit slightly lower but again a group about 35mm !
Shot another 2 targets that evening both 5 shot groups rifle was topped off to 170 bar again for these last 2! Successively 40mm and 38mm!
http://www.luchtbuks.net/index.php?act=Attach&type=post&id=48713
http://www.luchtbuks.net/index.php?act=Attach&type=post&id=48714
So I’m very pleased with these results!
Stealth is a tuned rifle with a 17years old Zeiss 6×42 scope .25 BSA lonestar 20″ barrel.
So hats off to JSB again!
Gr,
Marc
PS. Here’s the link to the JSB page!
Nebraska, did you go with a regulator set up on your nitrogen tank? Can you post a pic of your setup or PM a pic to me?
I just got my 494 CF nitrogen tank last Friday. That is one heavy SOB! When I ordered my tank, I told the guy that I also needed a CGA 677 nut and nipple for it. He told me that he would have everything that I needed there. Went to get the tank and he tried to sell me a CGA 580 setup. Now I am waiting for the correct nut and nipple.
A guy on ebay Is selling Aqua Enviornment regulators, over $500 retail, for $239. Been thinking about ordering one. Got my Condor this last March, have spent way too much money on it allready and still want more stuff for it.
28. 0 might just do the trick 😀 Guy on the Yellow said they could be out in August. Got my 435 cf. Nitrogen tank set up, and I need something to shoot, down to 6 sleeves of Kodiaks and there going fast. 😯
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
Welding/industrial air supply store. Like praxair.