NEW AIRFORCE PISTOL and barrels
All Replies
Haha cool. Man they are selling stuff on their site now too!
A TAG member in Hawaii claims to get low 800’s w/ eun Jin 35.9 g pellets out of a 10″ barrel. Don’t know about shot count.
I get those speeds with my SS with a high flow tank and 28 grain EJ pellets.
But not for a long shot string, the high 800’ds depends on what each valve likes. You have to experiment with different pressures and valve settings on the Hammer spring.
Mine loves the #8 setting with 28 grain pellets. However the lighter pellets it uses the (0) setting.
Now the 25 caliber in the Condor and tallondor I have like the low settings on any pellet. If you go high on the lighter ones you get a sonic crack and the groups spread out a little further.
But thats fine with me because as Ive said 45 yards is the only plce I use pellets for pest. So if it’s a 1/4 inch or 1/2 inch makes no difference to me, it still works good. 😀
Now bring on that new Airfoce Pistol I just thought my vault was full, I happen to have room for one more LOL. 😀
And that brings up a question I asked a while back…has anyone shot such velocity out of such a short barrel? I wonder if the accuracy will suffer due to the large volume of “unused” air exiting the muzzle??? Or will the internal frame baffeling “strip” it away????
A stock TSS shoots Kodiaks at approx. 750 fps.
With a Hi Flo tank it should not be a problem.
Tony
50FPE
So that is what 851 fps with a 31 grain Kodiak.
Could that be done with a High flow valve?
They had Gaylord write the press release. 😆
Roachcreek
I wonder what they did with the valve, spring, and hammer set up? It is getting some serious power for such a short barrel…50fpe!
Just a thought
Does anybody know of a ‘SHOTGUN” (load of #6 shot) type of conversion for AirForce PCP?
At least this one will be machined straight!
😆 X2
Hell I’m more excited about the new tri-rail from BKL.
At least this one will be machined straight!
At least they got off the pot with a .25 before me.
All they are doing is cashing in on the success of the aftermarket modders.
Wonder what quality the barrels and cost?
IIRC a turned up LW with bushings is worth around $250
Gee, maybe it comes fully shrouded in a 24″ model.
At least they got off the pot with a .25 before me.
i agree its just a talon frame with a small tank, i have the same thing right now a standard talon with a 12in barrel and a tony shroud. but its about time airforce comes out with someting worth buying. as far as 50fps i dont know about that, especially with the 12 inch barrel. 50fps should be no problem with the 24 inch barrel though.
- You must be logged in to reply to this topic.
Except everything says out of stock.