New Condor Co2 question
Just got my new Condor and had a few questions I couldn’t find answers to in any searches.
1) Is there any specific brand of Co2 tank that works better with the adaptor (seems the valve stem in some tanks does not get depressed by the adaptor)?
2) Should you hear a small hiss of gas when screwing on the Co2 adaptor letting you know the valve is being depressed?
Thanks much,
Ryan S.
All Replies
Viewing 2 replies - 1 through 2 (of 2 total)
If the tanks o-ring is lubed I don’t hear any noise when installing. If you hear noise, then something is leaking.
Pull the trigger and you’ll find out if it’s getting co2?
When removing the co2 adapter from the tank I can hear and see co2?
I use a 12oz Pure Energy and a 9oz Rhino Power with no problems.
Use plenty of pellgunoil, co2 rots o-rings and they will leak.
Sam
Viewing 2 replies - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Thanks for the info Sam.
Had an old pantball tank sitting around figured I would use it untill I get a scuba setup. Turns out the tank was empty(Doh). Got it filled up today and it works like a champ.