new condor valve o ring size?
dose anyone know what size o ring is in the valve retainer, I’m getting blow by and it needs to be replaced.
Thanks
All Replies
Viewing 9 replies - 1 through 9 (of 9 total)
I had to replace one a few weeks ago. I looked at 3 different hardwarestores and 2 plumbing places, finally give up and ordered 3 from AF. If you dont have any luck Ive got an xtra one I can send you.
Tag,
I’ve got it pulled out so I can take it with me to mach and that thing is damn near microscopic, I haven’t put a mic on the stem but the o-ring out of the retainer doesn’t even come in to contact with the stem, I will see what they have at the store and let you all know what I come up with.
it is .250 x .32 x 70
I’m going to step up to a 90 and see if it lasts longer
Thank you Rachel, now that is customer service!
Curious……
i think you want to double check your stem….. IIRC teh new style Condor stem is 5/16″ o.d.
Thanks for posting this! I would like to know what is correct 🙂
Rachel just got back to me on my voice mail and she tracked it down 8)
it is .250 x .32 x 70
I’m going to step up to a 90 and see if it lasts longer
Thank you Rachel, now that is customer service!
Will do
let me know what she comes up with ok?
Thanks Walter I’ll give that a try, I’m acutely on hold with rachel as I type this and it seems to be they don’t know, she just came back on to tell me she will find it and give me a call back.
GTBJ, should be 8.00 x 1.00 mm metric oring
Walter….
Viewing 9 replies - 1 through 9 (of 9 total)
- You must be logged in to reply to this topic.
ssschxzzzzz- ^^^^^^
now that’s the brotherhood 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8)
SAW