New Member
Hey guys , my name is Afi, and i have just got into the PCP world by buying my first PCP AAA .25 Condor with 18” barrel and TTTA from Tony ! A piece of art i must say .
Fitted with a BSA Contender 4.16/40 RGBE 7cm above the barrel .
High performance tophat was fitted last night .
Been always used to Gamo’s, RWS especially in .177 caliber .
The gun will be mainly used for hunting and target shooting .
I have a million questions 😀 and a lot of money to invest in upgrades ,
What power should i use it with when shooting regularly ? and what is the Zeroing range that you guys recommend at 8X .
Any upgrades u recommend ?
All Replies
Viewing 11 replies - 1 through 11 (of 11 total)
Viewing 11 replies - 1 through 11 (of 11 total)
- You must be logged in to reply to this topic.

It’s all of 34 F or 1 C here at noon today with a slight breeze and partial sunshine for a change.
I don’t know about temperature and nitrogen tanks. A few guys use it as they get a lot if fills and I think a little more power. I use air and the ShoeBox compressor that puts out 4500 PSI. I have been using a fairly portable 17 cu.ft. 4500 PSI carbon fiber tank called the Guppy. Just target shooting I hook it up through a good size regulator as a tethered constant pressure. That works great for me.
Because I just bought a TalonTunes .25 Condor I also bought a 97 cu.ft. 4500 PSI tank called the Great White. I should have enough for several trips to the range now. I used to use Hill pump at the range but now I can shoot uninterrupted. Actually, the pump was good exercise and helped get my blood pressure under control.
The ShoeBox compressor requires a little attention for lubrication every few hours but gives you a lot of independence.