New member from Long Island
Hi I’m a newbie from Ny,and I bought a used talon ss.The rifle is stock and I need to quite it down.I pulled the barrel out and both barrel bushings are solid,no venting holes .Is this where I need to start?
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
Ok I’m going to drill the 2 small holes in the frame,the front bushing is the one closest to the muzzle?How many holes are needed,and how big ?thanks for your help!
That is a good place to start, but only vent the front bushing, not the rear. You may also want to drill one or two very small vent holes under the forearm, between the bushings. We also have several great machinists here who can help with a shroud, and if Subsonic is around, maybe some baffles for the area in front of the barrel. Might want to keep an eye on Pyramid’s site if you don’t want a shroud, as they have AirForce’s baffle set up for pre-order. Looks like it will come with two new barrel bushings, front vented, rear o-ringed, a spacer, and three K style baffles. If you prefer going the shroud route, click the banner at the top for Talon Tunes, and Tony will hook you up.
Casey
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Check out the Quick Reference section. There are a few baffle mods for the SS on there you can make from stuff at Home Depot
BTW… :tag: