Q:

New Talon SS owner

Hi folks.
My Talon will be arriving tomorrow. Other than cleaning the barrel, are there other specific new owner things to know with the Talon?
My primary purpose is for pest control, starlings and English sparrows at < 50 yards. I could not get the Hatsan 95 tuned to accurately hit them all the time. It was also loud enough to scare them off when I missed, which is not a bad thing, but I’d rather have a dead starling than a scared one.
Thanks.
Doc

Talon/Talon SS

All Replies

Viewing 13 replies - 1 through 13 (of 13 total)

Hi Doc,

The JSBs don’t seem to need washing to me. I only wash the Eunjins because they do come with some lead flek and bits on them that you wouldn’t really want to put in the barrel. But they are fabulous pellets and well worth the time giving a quick rinse. Dropped a pigeon this afternoon with the 28gr Eunjin after my gun had already fired forty plus target shots with JSBs and it was instant lights out for the pigeon at about forty yards. I have tried all the popular pellets and Eunjon and JSB come our best in the Airforce guns. Don’t bother with predator polymags as they aren’t accurate enough. No good having take down without accuracy.

And yes I would add a few drops of a light pellet oil to all my tins. But you don’t need much. Four or five drops disperse amongst all the pellets within a few days.

Chrisyboy,
Would you recommend a little pellet oil spray in all pellet tins? I had mixed results with washing Premier Pellets with my Hatsan 95. They were not as accurate.
And no washing for the JSB’s??
Thanks.
Doc

If it puts you in a good mood she will see the change and positively link the two. That’s what mine has done so she tolerates me in “AA” (Airforce Addiction). Yup I would go for some Eunjin domed then for your hunting pellet with accuracy and the JSB 15 gr for your target practice. You will smoke a starling with a 15gr JSB but I wouldn’t go much higher on game size than that without sliding in one of your Eunjins. I find the Eunjins need washing with a little soapy water which is very easy. Just swill them around in some water with a little detergent then rinse them, then let them dry on some paper towel. Then put them back in the tin with a few drops of light oil. Put a few drops of light oil in all your tins for self cleaning lubricating of your barrel as you go along.

You can get some good power with your gun following some of the tips on this forum and with Tony’s bits and the advantage is your gun will also be lovely and quiet. Definitely backyard friendly. Enjoy. :fishinghole:

Sorry Lurker #1,
I still didn’t answer all the questions.
I’m going to be filling by pump. Definitely can’t justify the tank expense until it has proven itself in pest reduction. If I get rid of all the starlings my wife would let me buy just about anything.
The other fun hunting possibility is the farmer who rents most of our land has a pidgeon problem. That could be a full time job :biggrinn:
Doc

Thank you for all the awesome help.
I will have a standard 0.22 12 in barrel Talon SS.
Doc
I’m not sure my wife is appreciating my dive into this addiction Lurker #1. :whistle:

My home made LDC for my Talon SS 22 cal back ported to reduce the pressure, it’s very light, efficient and effective !!!

~ GKU

What length barrel are you running now Birdman? How does it work out extending the barrel on the Talon SS? Do you bother then sticking a moderator on the end of your barrel or do the internal baffles keep the noise down?

Countrydoc , Before I up-graded my Talon SS to .25cal. it was a .22cal. with a 12″ barrel and I was able to kill a coyote at 9 yds. by shooting it
between the eyes with H&N 18.21grain Crow Magnums . The power wheel setting was set on #4 because I was set up for shooting crows in my
backyard at the time the coyote showed up . This is just a little info that I hope will help you to understand the basic power your PCP will be
able to give you in your shooting endevors .

FROM : THE BIRDMAN

Countrydoc I don’t think you answered Lurker’s questions on calibre and barrel length? Probably the most important thing is to put the pellets in for the task you are trying to achieve. You have hunting pellets and target pellets. A good hunting pellet that is still very accurate is Eunjin domed. I’ve just experimented with some Eunjin pointed and they seem too big for my barrel so I’ve rejected them. So for your Starlings and other vermin I recommend Eunjin domed. For your target shooting when its all about accuracy not take down I recommend JSB. Depending on what calibre and barrel length, which is why Lurker asks the question, one grain JSB will be better than another in your gun. When I had the 12 inch barrel my gun liked the 15gr JSBs best but now I’ve moved to 24 inch it loves the 18gr JSBs best.

I think you should also learn how to strip your gun, and forgive me you may know already, and it does need greasing in certain areas from time to time. There is then all the fun of fitting the trick bits to it to get more power, consistency, etc but have some fun with it first, as a package from the factory it should be fine. And it will definately smoke Starlings. :fishinghole:

We need a second opinion dr ❗
I was using the OPTH with small restrictor on my tuned down 12″ .177 Condor high flow tank.
I really miss that rifle. I hope to get a used frame someday and rebuild it.
Its old frame is soon to be sporting a 32″ .257 big barker ❗

Did anyone explain how adictive this hobby can become :angrymob:
Besides the .257 I have money down on a Vulcan.
Its really not as expensive as some may think because we have a great advantage over powder burners, we get the air for free and recycle it :whistle:

Lurker #1, thanks for the reply.
I wasn’t sure if the Talon Tunes one piece top hat was ok for the Talon SS as it seems it is for the higher flow Condor set up. If that is not the case I would love to have the flexibility of the different limitors.
Thanks again.

Talon or Talon SS w/sound suppresser ❓
Caliber and barrel length ❓
CO2 or Air ❓
How you gonna fill it ❓

Write down the Power Wheel setting just in case it was already setup properly as Talon Tunes does when modding.
Wiggle the OEM top hat to see if it may be loose and if it is an OEM check the gap between the top hat and the brass guide with auto type feeler gauges. It likes to change on its own. If you didn’t already get the Talon Tunes quick Change ONE piece Top Hat , now is a good time to get one ordered. It will eliminate the ‘oh shit, what am I doing wrong now’ ❗

You’ll love that Talon for taking out starlings once you know it’s needs 💡

AND

:tag:

Ok depression has set in. The rifle won’t be here until monday, so I won’t have the weekend to play 😡
Mixup in the order. Should be here monday.
Doc

Viewing 13 replies - 1 through 13 (of 13 total)

  • You must be logged in to reply to this topic.