All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
Damn, I thought it was an electric chair.
my back is crap as well….sitting here buzzing on Norco painkillers
you like the invert thing? I hang upside down from a bar, works wonders after a long day.
I use it mostly as a coat rack. 😆
Lol, I have a teeter ups and I love it…5 minutes in the morning and 5-10 at night and my back has been better since! I used to have major back problems since I was 16 and that was 20 years ago.
Hey LMTSS,
Can you tell me what the outside diameter of the two pieces of tube you used are? I have been wanting to do something like this, where I could make a shroud and then fill it with my own internals, but it seems the pieces I buy have been off by a few thousandths of an inch each time.
Thanks,
Chris
you like the invert thing? I hang upside down from a bar, works wonders after a long day.
I use it mostly as a coat rack. 😆
Nice work!
you like the invert thing? I hang upside down from a bar, works wonders after a long day.
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
Can you tell me what the outside diameter of the two pieces of tube you used are?…
I guess he’s not coming back. If it helps, I’m planning on building my own and have taken measurements. I am going to order 6061 aluminum tubes measuring 1″OD and 1″ID x 1.25:OD to make it match the frame size. Maybe later spot weld or adhere matching dovetail rails for extra credit.
Inner:
http://www.onlinemetals.com/basket.cfm?pidadd=1213&CFID=30499830&CFTOKEN=43365973
Outer:
http://www.onlinemetals.com/merchant.cfm?pid=4357&step=4&showunits=inches&id=71&top_cat=0
Theoretically since the OD of one is the same size as the ID of the other it should sleeve together perfectly, hopefully requiring a little heating/cooling to expand/contract them and then press together.