ninja air w/ co2 adapter
Ok this is either a dumb question or an idea that hasnt been discussed. Possibly a good idea. I was thinking of those ninja air tanks with a co2 adapter from airforce. I would imagine the ninja tank will work with the adapter in the gun. Why you ask. I have a paintball shop close by who said they would fill me up. I was thinking I could get the fill adapter as well and fill the spin tank later. The shop saidthey couldnt do large tanks. Im still researching but this might be a decent idea. What say the people who know what they’re doing.
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
To answer your first question, yes, the co2 adapters will allow you to put a paintball high pressure air tank on your condor or talon. I have one of JDSAIRMAN 62 cu in tanks with a regulator set at 1900 psi. It works great and the quick disconnect makes it easy to fill. It does require a lot of pumping with my Hill pump to fill it however. To go from 2000 psi to 2800 psi requires three cool down breaks and about 20 minutes of pumping across the four pumping sessions. Not as many shots as I would have expected though in 22 cal, probably between 40 and 50 per fill. With the .177 barrel however the count goes way up, to say 120 or so.
Ok, I got an air venturi tank with fill station. Ordered from PA along with talonss. I was told it was made by ninja for PA./? Its a 90ci tank which should be good for 7 top offs for a 177 at medium power, right? I will post up when everything is set up. I was on a budget so I went small. At a later date I want to get a tiger tank from Joe.
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Thanks pig