O rings for the Airforce Condor
Sorry for my poor english 🙁
I would like to change the o-rings of the breech slide of my Condor . I thing there are only two ‘O’ rings of the same measurement.
It’s dificult for me to find this o.rings in Spain. Sometimes i’ve buy some CO2 tank o-rings in http://www.paintballorings.com/index.htm and the shipping cost to Spain are reasonable. Probably they have also the needed o-rings for the Condor but i don’t know what are appropiate :
http://www.paintballorings.com/linked/size.pdf
Can you help me to determine the correct o-rings?
Do you know any other place to buy on-line this o-rings and they ship to Spain?
Thank you very much
All Replies
Viewing 10 replies - 1 through 10 (of 10 total)
Thanks anyway Riff 😛 😛
If anybody else can help, please chime in ❗ ❗
Sorry for hijacking the thread 😳 But I need help ❗ ❗
hi Picudo….look this: http://www.seventyninedesign.com/shoot/Stealth/valve5.htm
Saludos desde España
Thanks, but that’s not the one I’m looking for. Actualy it is not listed in “the Big File”. It is the Large oring that goes between the valve and the tank. If you unscrew the valve from the tank, you’re going to see an oring, that’s the one I’m looking for.
Thanks anyway Riff 😛 😛
If anybody else can help, please chime in ❗ ❗
Sorry for hijacking the thread 😳 But I need help ❗ ❗
Thanks to all 😉
Do you mean the valve-stem?
http://talonairgun.com/forum/viewtopic.php?t=21
Check #41.
Or PM Tony, he would know in case the above isnt what your looking for.
Riff:
Do you know the size of the valve-to-tank oring? ❓
From the link you posted, buy these ones -011B90.
Those are 90 durometer in the size you need.
The prefix 011 tells you the size, which is 1/16″ thick, 5/16″ID and 7/16″OD.
You can use this to help find metric equivalent for your chosen sizes. May help with local sources.
http://www.allorings.com/size_cross_reference_framed.htm
Mike
I found them on ebay….cheap
You will want 5/16″ x 7/16″ x 1/16″ in 90 durometer.
Viewing 10 replies - 1 through 10 (of 10 total)
- You must be logged in to reply to this topic.
Yeah!! That’s the oring that I want the measurement for. Unfortunately, it’s not shown in there either 😥
Thanks anyway!
Saludos…..