One Piece High Performance Tophat

Time to take it to the range…..DANM, it’s raining again
I wanted to finish zeroing my scope and see if I could get good groups.
I’m tired of shooting at my back hall target but at least I got some DATA:

This is the setup I intend to shoot for a while at the range.

TT AAA .25 X 24″ CONDOR, TT One Piece High Performance Top Hat, Re#1 (Large Restricter)
H&N 30.5 gr average BARACUDAs.

Starting at 2500 PSI
SHOT#/FPS
1) 907.14 first shot is always a bummer 🙄 Not ❗
2) 905.38
3) 906.26
4) 904.30
5) 902.34
6) 900.19
7) 899.93
8) 898.19
9) 896.13
10) 893.88
ENDING PSI 2350 (used about 15 PSI per shot) There is a lot to like about this setup ❗ ❗ ❗
Average 901.37 FPS
Extreme Spread 13.26 FPS
Standard Deviation = 4.58

Actually, 2500 PSI was where I left it 4-5 days ago and before topping it off I figured I’d chronograph a couple Baracudas. Well, it don’t need no more air. This will do fine for a regular fill pressure.

Then too, I wonder it there is a curve 😎