Q:

ordered the compressor

well after having the chance to see one and use it i ordered this compressor , no it will not fill a large tank but all i am filling is my wildcat and marauder , It filled the Wildcat from 120 bar to 230 bar in less than 3 min , and for 357.07 shipping and all i think it is well worth it https://www.aliexpress.com/snapshot/8515754406.html?orderId=80643758450999&productId=32738731612

General Chat

All Replies

Viewing 15 replies - 1 through 15 (of 39 total)

1 2 3

Mine came in yesterday. Had the oil waiting. Fired it up and it works like a charm. Goodbye handpump!!!!

just ordered one for $430 shipped. Paypal from ebay so all good.

i wouldnt post the pics either

ya my CC company sent me an email so I approved it. Tried to do it again and said the same thing. So I found them for $100 more on ebay and might just go that route. Def not feeling like posting a pic of my CC and drivers license on some foreign site lol…

had the same problem had to call my bank becuase it was a international purchase to ok it recievied mine wednsday so far works great but never asked for pic of drivers license or debit card

anyone else have a problem ordering? They denied my payment for security and now they want a pic of my drivers license and the credit card I used. Whats up with that?

I don’t know ,, It never shut off by itself

quote olbluecat:

Less than a min between guns, 61c deg, highest temp on pump, temp in shop 64f ,

Strange. Mine shuts off at 58C and yours keeps going? At what temp does yours shut off?

Less than a min between guns, 61c deg, highest temp on pump, temp in shop 64f ,

quote olbluecat:

Another update on the aceeagle ,, Still no issues , had another get together at my place for some shooting fun with 9 friends and the pump filled all the guns all day , checked the filter a few times and at the end of the day noticed the first filter in line seemed slightly damp pressing it to lip but left no spot on tissue paper , replaced it anyway they give you a whole bag of the filters and let the one i took out sit on the heater for a while , it was clean and no sign of oil or dirt , i have no problems with the pump getting to hot i use a two gallon tank of water and changed it once after filling 6 guns back to back for the water was getting a little warm, mine is a 220v and it might run cooler than a 110v so far very happy,

Can you estimate your total run time for filling 6 guns back to back? How long of a rest between guns and what was your max temps?

Also – what is your ambient temps while doing this? I am in FL so ambient temps were in the 70s

Would running the compressor with no load be harder on it than running it while filling tanks?

Another update on the aceeagle ,, Still no issues , had another get together at my place for some shooting fun with 9 friends and the pump filled all the guns all day , checked the filter a few times and at the end of the day noticed the first filter in line seemed slightly damp pressing it to lip but left no spot on tissue paper , replaced it anyway they give you a whole bag of the filters and let the one i took out sit on the heater for a while , it was clean and no sign of oil or dirt , i have no problems with the pump getting to hot i use a two gallon tank of water and changed it once after filling 6 guns back to back for the water was getting a little warm, mine is a 220v and it might run cooler than a 110v so far very happy,

quote olbluecat:

Ok a little up date on the compressor , so far it has a little over 55 fills on it and have not had any issues , the oil in it still is water clear and the in line filter is still dry, the humidity is very low and my shop has wood heat so it is very dry air in here will see as the summer comes and it gets very humid here in SC how well the filter works, I think one reason the filter stays dry is that the pressure hose to the gun is mounted on top of the block with pressure release valve on the bottom , not sure time will tell but one thing it sure beats the hell out of hand pumping, I had to buy some new water hoses the ones that came with it had kinks it them and could not get them out but new hoses were abote 2.00

PS – the oil I used #46 AW Hydraulic oil per the manual after the Yong Heng 110V unit shut off at 14 minutes 58C

The oil was slightly gray and no longer “water Clear”

quote daveshoot:

Did that get there on the 24th?

I was interested because the one in OPs link was for 230V 50Hz only, so a little confused between the ACE EAGLE and the Yong Heng.

I am not in a hurry, and will follow updates from you lab rats with interest. I could see one of these in my future if they stand the test of time.

I am not too happy and am going back and forth with the seller right now

I tested the pump without any load (pumping out to free air) and 4 liters of Water / 1 liter of Ice for cooling.

The pump shut off after 14 minutes due to the temperature reaching 58C
I assume that is the thermal cut off switch. It started up again after I let it cool down to 34C.

Did that get there on the 24th?

I was interested because the one in OPs link was for 230V 50Hz only, so a little confused between the ACE EAGLE and the Yong Heng.

I am not in a hurry, and will follow updates from you lab rats with interest. I could see one of these in my future if they stand the test of time.

quote olbluecat:

I ordered the 110v model. It’s arriving the 24th JAN

Viewing 15 replies - 1 through 15 (of 39 total)

1 2 3
  • You must be logged in to reply to this topic.