Original Kalibrgun Regulator Tester (with pics)

Hello all, I recently bought a OEM reg tester from kind SirVille for a cheap price, he is pretty much done with Cricket’s by now so he didn’t really have much use for it anymore. I have been screwing around with it a bit now and finally managed to remove my slow anoying leak! Now my reg is as polished and non-leaky as can be!

The reg tester is basically a miniature version of the airtube from a Cricket, it has a valve, a fill port and a tube. It also has all of the tell-tale holes used to find out where the gun is leaking wich is AWESOME!! And also it is shrouded lol.

This is the outside:

Opening it up

The shroud is a standard Cricket shroud with baffles but a different endcap. It attaches to the exit hole of the tester. When you hit the valve with a small hammer the air releases into the shroud.

Here you can see my reg is set at 130 bar, the manometer showing the pressure inside the tube measured 175 bar, works great.

And here it is next to Dman’s reg tester.

That would be all, :4: