Paintball Gun Conversion
Hi guys,
I made a post on hear a wile back regerding converting my gun to fires arrows. well yesterday I was thinking bout making a blowgun and the only suitable tube I have is my 24″ paintball barrel.
So wile thinking bout this I figured I could load the darts into the gun and use my paintball gun to shoot darts. Then I started thinking bout shooting arrows from it! Is there anyone hear that has any views on this that can give advise or point out oviouse flaws 😆 ?
regards,
Joey.
All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
Hay guys,
jus so you know i had 4 wisdom teeth ansome of my jaw removed today so im druged up to my eyeballs so if im typin a bunch of shit, sorry an dont be afraid to rub it in 😆 .
thanks for the imput so far and iv thought about it and come up wid a ruff design for an arrow that may work.
the back end would be lke a cone with some flights glued on and the middle piece would be to keep the arrow strait i n the barrel.
agen any oviouse flaws im over lookinhg then jus let me know.
This is for info so no UK members get into trouble.
Damn Robin Hood!
You can bet that whatever it looks like it will be banned in the UK.Bow hunting is illegal here as is ownership of broadhead arrows.You can own the heads as a collector.
This is for info so no UK members get into trouble.
Hay Joe, there is an arrow conversion in the works by tagdagger, sounds like the kit is just about ready for some third party testing so stay tuned for a rundown of the systems performance 😈
Only thing I would say is you need to find a way to make whatever you are shooting fit tight to the barrel, if too much air can go around it then it won’t shoot worth a crap.
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
jus so you know i had 4 wisdom teeth ansome of my jaw removed today so im druged up to my eyeballs so if im typin a bunch of shit, sorry an dont be afraid to rub it in 😆 .
thanks for the imput so far and iv thought about it and come up wid a ruff design for an arrow that may work.
the back end would be lke a cone with some flights glued on and the middle piece would be to keep the arrow strait i n the barrel.
agen any oviouse flaws im over lookinhg then jus let me know.
Looks like a pretty good design to me