Photo posting?

How do I post photos from Photobucket
here so that they show up in my posts?

Do I use the direct link,HTML code or
do I use the image code?

Thanks in advance.

HTML

Direct link

http://i240.photobucket.com/albums/ff22/airforcehunter/Onlyahammerclick3.jpg

Image code

[IMG]http://i240.photobucket.com/albums/ff22/airforcehunter/Onlyahammerclick3.jpg[/IMG]

General Chat

All Replies

Viewing 5 replies - 1 through 5 (of 5 total)

martin777

Participant

December 9, 2007 at 11:28 am

quote TeflonTron:

Interesting LDC there!

GEEZE–size DOES matter!

p.s.-Does this post need to be moved to the new “shrouds” section?

Participant

November 2, 2007 at 4:57 pm

Well, I fabricated it out of fiberglass
and epoxy resin (I use to fabricate
boats out of same) with PVC mounting points (Don’t
want to scratch the gun), it weighs 9.7 ounces, has a 3″
diameter, is 25″ long and adds 19″ to the
overall length, 64.4 cubic inches of volume, measured by
water displacement method.
It has 4 reverse cone baffles and
8 chambers and is supported at 2 places.
It’s extremelly quiet, especially with the foam wrap
slipped on. and handles 100+ fpe
and cost around $70 and 45 hours to build.
Not counting that it took 4 tries before I came
up with one that would work. The first one
lasted 127 shots then blew to pieces.
The next 2 started to develope cracks after
a few hundred rounds. I have over 6000 rounds through
this one with no sign of failure yet.

It is very effective for Rockchuck hunting.
I can usually nail 4 or 5 before the whistle
sounds and they all dive. I have used it a lot
for goose control.

Here is a photo of the basic design. I would post
photos of it’s construction, but that would show
a couple of my secrets before production starts.

http://i240.photobucket.com/albums/ff22/airforcehunter/DSCF0003l.jpg