pics of new Condor SS trigger
I posted this on the Yellow today also. Just thought I would share in case anyone was interested in the new trigger system.
——————————————————————————–
I thought I wuld try and lighten my trigger just a bit on the Condor SS. I must say the trigger components are very well made with no rough edges and there wasn’t much to do to it except a little polishing. It did help as I was able to get it down from 3 1/2 lbs to 2 1/2 lbs. I am going to leave it at that. I also polished up the safety bar and added a little moly to all slidng surfaces and that helped a lot. It is now very easy to slide on and off and yet is still positive.
I tried to shoot some 50 yard groups but it was too dang windy and then started raining on me again. Every time I set up my shooting bench this spring it seemes like it starts raining. and it has been windy too. The groups I did shoot went from 3/4″ to about 1 1/2″ all in a horizontal string.
Also just got in and installed Adam’s Wokbut. Very nice.
Here is a pic of the trigger components
All Replies
Good Morning..
As the A.O.A. He said he did not send to Brazil the new super sear, I decided to solve the problem, I took the original sear and made a slit in it, tucked a bit of a alen and cut the previously measured size of the weapon joined the two pieces and was sanding to get the best fit.
the trigger was very light, however continued very safe.
a picture of the bonding process.
so you’re stuck, I will give the finishing sanding very lightly !!
On the ”NEW STYLE” AF guns, can anyone tell me the weight of the trigger AFTER adding the super sear to it? I saw where the guy who developed it said a bit over 1 pound ”but” he’s selling them lol…. like to hear from you guys,, thanks
This might be true however we might have our new super duper sear on the way sooner then we all thought.
http://www.network54.com/Forum/79537/message/1429115109/Thanks+again+to+those+who+responded+to+the+%26quot%3BNew+AF+SuperSear%26quot%3B+thread.
great news
do you know when it will be available?
I found this schematic for the original gun somewhere (thanks to whoever shared it with me!)
It’s a pretty good schematic considering there’s nothing out there, that I’ve seen. Thanks for letting me tag onto your thread. 😮
This might be true however we might have our new super duper sear on the way sooner then we all thought.
http://www.network54.com/Forum/79537/message/1429115109/Thanks+again+to+those+who+responded+to+the+%26quot%3BNew+AF+SuperSear%26quot%3B+thread.
He couldn’t handle being on this forum… He doesn’t have thick skin…
Not much sense posting a super sear mod for the AirForce on the 54 forum. I’m not even registered there because I don’t like the archaic style of the site. He would get a lot more interest if he posted here. Or on Gatewaytoairguns where there is 10 times the traffic. I bet most of the old style Airforce trigger owners don’t even know about the two stage adjustable super sear that has been out for years.
.
http://www.airgunsofarizona.com/CustomParts.htm
.
I will jump all over this
http://www.network54.com/Forum/79537/message/1427753531/How+much+interest+would+there+be+in+a+new+SuperSear+for+the+current+AirForce+line-
I’m hoping we will see a new version super sear so we can have a good adjustable trigger on par with all the other major manufactures. I should have saved $100 and bought the old style Talon SS that was available and put $55 toward a two stage sear.
.
http://www.airgunsofarizona.com/CustomParts.htm
.
I took the trigger apart polished and lubed it up in 2013 when I got the gun and started my tinkering. It did help a trigger that was not all that bad to start with made it smoother. I may take it apart again and switch up to lighter springs if i can get them. Some have claimed pen springs? We will see
Oaks
Thanks Mrnewbie, good information and good pics.
Would some one please post some pictures and instructions on how to remove the trigger and parts fom the gun. I would love to do the spring mod but am afraid to start tearing into this this stone cold? Also, I am assuming this is the new 2 stage trigger that comes stock in the condor SS
The parts look good!
Hi,
I gave all the trigger parts a good clean, polish, and moly. The auto-safety toggle had to go. Referring to the first picture in this thread, I tested the trigger with and without the spring and pin pictured far left. It doesnt seem to make any difference to the gun. As a matter of interest, I added 2 hammer weights and set the PW to max. The trigger worked perfectly.
What is the purpose of the removed components? No adverse effects so far, but I dont want to do any long term damage.
Regards,
SC
- You must be logged in to reply to this topic.
Hi all
Can anyone post the diagram of the new trigger? I cant seems to find one. Cheers guys
Ed