Pyramid air Codor with/without Hi-flo valve
Does this Condor have a standard valve or a high-flo valve?
http://www.pyramydair.com/p/condor-air-rifle.shtml
All Replies
Viewing 9 replies - 1 through 9 (of 9 total)
NOT TO CONFUSE YA, BUT IF YOU JUST GET THE HI FLO TANK FOR A GUN YOU ALREADY HAVE, BUY A STRIKER WEIGHT, TOO.
YES, IF YOU BUY A CONDOR, YOU GET A HI-FLO TANK.
So is this tank http://www.pyramydair.com/s/a/AirForce_Extra_Air_Tank_Air_or_Nitrogen_Hi_Flo_Valve_for_Condors/2625 on this airgun http://www.pyramydair.com/p/condor-air-rifle.shtml, cause im totaly confused?
To clear stuff up; im looking for the cheapest parts to get a .25 cal Condor; barrel, tank and frame (barrel,frame I got, so now I looking at tanks)
a hi flo is what makes a stock condor a condor, otherwise its a TSS with a longer barrel and scope rail…so to keep it very simple-HIFLOWHIFLOWHIFLOW!
from air force, the condor has the factory high flow, there are after market high flow valves that flow more then the factory condor valve. but from the factory , you can get the talon valve (standard valve) , the condor valve( high flow) in 22, condor valve (high flow) in .177 with stronger in valve spring to keep 177 from dumping the tank. and last the micro tank which is the modified talon valve which lets out very little air for plinking and low power.
So hi-flo or standard for a .25 Condor?
well, ALL condors should have a hi flo valve and a striker weight, but PA did fuck mine up and send a .22 hiflo instead of a .177 hiflo(stiffer return spring), you ever have tank dump? wear a diaper! 😯
It has the standard Condor valve which is the most powerful valve AF puts on the Condor and it has the Condor hammer and hammer weight assembly.
Regards,
Roahcreek
Viewing 9 replies - 1 through 9 (of 9 total)
- You must be logged in to reply to this topic.
@ moneyshot the tank is for my second .25 cal, that im gonna assemble and later tune. I just wanted to know, if those to valves (first and second pyramidair link) are the same. The striker weight came with the condor frame.
Thank you all for helping me figure out the valve situation.