Question about fill pressure?
Does anyone know why my Talon with a standard tank now likes a 2725psi fill at 70 degrees but a few months ago it was 2500psi? I have not done anything to the tank,hammer spring, hammer weight, and the power wheel is on the same setting.
Thanks,
Jeff
All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
Yep the valve stem has burnished itself with use, and functions easier. Probably have a smoother ID of your frame now too, making the hammer strike more powerful.
test
10,000 pellets !!!
I guess we now know how many it takes to polish a Talon in ! 😀
Also the gauge could be getting tired.
But with all the stuff I have played with, “The sweet spot always moves” !
maybe its just breaking in
breech smoothing out and valve and all the springs settling in
just a thought
Yes I bought it new but I have over 10,000 shots through it. With 4-5,000 shots with my most recent pump so the pressure reading is from the same gauge.
did you buy the gun new?
maybe its just breaking in
breech smoothing out and valve and all the springs settling in
just a thought
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
I bet you are 100% correct RiffRaff because I have had a 25-30fps velocity increase with .22 kodiaks. I think I will just keep shooting like it is though because of the little more power with the same velocity spread when it shot slower.
Thanks