Rabbit Headshot on "GunCam".

I was standing behind the gun so it was hard to hold it still. Got the shot though, right through its head. I tried to upload in HD, but not sure if it worked. If it does work you should be able to see where the slug hits after leaving the rabbit. Shot was about 20yds, no further, with Jerry’s 7 Ring. The exit wound was pretty clean.

General Chat

All Replies

Viewing 8 replies - 1 through 8 (of 8 total)

joeyplayer

Participant

March 24, 2010 at 8:59 am

Yer boiiiiiiiii, good shot

slayer5

Participant

March 22, 2010 at 7:08 pm

I have no idea what you did to get that but that was cool shit right there!

benneeb0y

Participant

March 22, 2010 at 5:42 pm

Nice head shot. He dropped quick!

assman83

Participant

March 21, 2010 at 1:59 pm

quote AWS welder:

i watched it in 1080p on my laptop. how does that gun cam work. is it mounted to the eye piece then you look at the lcd screen on the back of the camera or what??? nice shot, rolled the little bugger up.

Ken

Ken,
here is the link to to my setup. You dont need to do the stuff I did, but it holds the camera in place better and blocks the image that is outside of the scope. I need to make the adapter adjustable length because the eye relief changes with the zoom of the scope. I usually do use the lcd screen on the side. Do to the length with the camera it hard to shoulder the gun to hold it steady. I have seen video glasses that could could be plugged into the camera and worn like VR goggles, but not sure if they would be worth it. I usually don’t zoom in so far with the camera, but it was low light and hard to see and focus. Do you think the HD worked? I see the HD buttons, but I’m not sure if I can see the difference in video quality. I may need to buy a different video editing software.

http://talonairgun.com/forum/viewtopic.php?t=12056&highlight=

Thanks