Ranger 45 Twist Rate
For those of you that have the XP Ranger 45, does anyone know the twist rate of the barrel?
thanks, JD
All Replies
Viewing 8 replies - 1 through 8 (of 8 total)
It is actually possible to screw the barrel in one turn too far, or at least on mine it is.
Roachcreek
The twist rate is 1-22.
The barrel can be removed. It takes 3 screws to disassemble the upper and lower. 1 is in the barrel band, 1 at the rear of the action and 1 in the breech opening. Once you lift off the breech, the barrel unscrews. When you screw it back in, you need to see the transfer port so it gets aligned, then replace the 2 screws and the barrel band.
Another question. 🙄
Is the barrel removable and if so, how? Is it much of a problem. The reason I ask is I hate to clean from the muzzle other than minor cleaning.
JD
Thanks guys for the info. Another question, how is the trigger? As I see it there is a massive sear holding everything back by the head of a hex-screw and the only adjustment I see is engagement. Is this correct?
Thanks, JD
I think it is 1-22.
Roachcreek
I think it is 1:22 RoachCreek will know for sure.
not 100% sure but i think its 1in20
Viewing 8 replies - 1 through 8 (of 8 total)
- You must be logged in to reply to this topic.
Is the barrel removable and if so, how? Is it much of a problem. The reason I ask is I hate to clean from the muzzle other than minor cleaning.
JD
This gun is just bad azz ! mine shoots like a monster ! cleaning is not that hard on these from the muzzle ,and i have the 36 barrel