REMOVING CO2 TANK
Is it best to remove the tank with the co2 adapter attached or leave the adapter in place in the talon and unscrew the tank from the adapter ?
The reason Iam asking is I had read that there had been a situation when the dude unscrewed them together from the gun it trashed the o-ring and I beleive it blew it out.
All Replies
Viewing 2 replies - 1 through 2 (of 2 total)
Keep the adapter and tank together.
Viewing 2 replies - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
If you remove both togather, Move the bolt forward so the orings are not in contact with the TopHat. Do the same for install.
My CO2 adapter locks to the frame and is quite hard to remove so I usually leave the adapter in the frame. Less wear on the Frame!
Sam 😕