Q:

Reply

Can somebody explain the difference between the condor , talon and shadow.
And is there much difference in the gunpower stealth to the usa version? :tag:

General Chat

All Replies

Viewing 10 replies - 1 through 10 (of 10 total)

Ugh… if that was mine, I would be tapping it 6-40 Left hand thread and removing that POS. Of course, you have the brit laws so do at your own risk.

I will check on mine now.
Thanks

quote mmamonster:

quote nickhammond121:

Mines UK sub 12. I know yours is FAC but it may still have an anti tamper stud fitted. I’ll try and get a photo later, but if you remove the fore grip one of the barrel studs is installed and drilled out.

Nick

Sent from my SM-G935F using Tapatalk

Hi,
Thanks for that a photo would be good. I email drum from leupeys custom shop, hopefully get a few more upgrades for it.
Atb
Mart

Grabbed a quick photo, the lower hole is for the fore grip, the upper one is the barrel bushing screw. As you can see it has been drilled so it can’t be easily removed with the usual allan key:

quote Rrdstarr:

quote mmamonster:

Thank you both for the reply. Mine is on licence 45ftp at the moment, looking to tune it up but not getting much response on here, they are a marmite gun in the uk.
Atb

Dig into this site, you will find the info you need. I have printed quite a bit of material on tuning from this forum alone. Trying to organize it into a three ring binder.

Good idea, i think i get one at the weekend.
Atb

quote nickhammond121:

Mines UK sub 12. I know yours is FAC but it may still have an anti tamper stud fitted. I’ll try and get a photo later, but if you remove the fore grip one of the barrel studs is installed and drilled out.

Nick

Sent from my SM-G935F using Tapatalk

Hi,
Thanks for that a photo would be good. I email drum from leupeys custom shop, hopefully get a few more upgrades for it.
Atb
Mart

Mines UK sub 12. I know yours is FAC but it may still have an anti tamper stud fitted. I’ll try and get a photo later, but if you remove the fore grip one of the barrel studs is installed and drilled out.

Nick

Sent from my SM-G935F using Tapatalk

quote mmamonster:

Thank you both for the reply. Mine is on licence 45ftp at the moment, looking to tune it up but not getting much response on here, they are a marmite gun in the uk.
Atb

Dig into this site, you will find the info you need. I have printed quite a bit of material on tuning from this forum alone. Trying to organize it into a three ring binder.

Thank you both for the reply. Mine is on licence 45ftp at the moment, looking to tune it up but not getting much response on here, they are a marmite gun in the uk.
Atb

All the Gunpower ones are 12ft lb according to British Laws.
The Texas made Condor and Talon and TalonP all have a power wheel for adjustability.

I think the US versions have a power wheel and are over 12 ft lbs of power.

Viewing 10 replies - 1 through 10 (of 10 total)

  • You must be logged in to reply to this topic.