safety removal
Hello,
I have tried to remove the safety block inside the trigger mechanism.
take it with the spring also, but after take it, my talon won’t cocked.
it always release, if i try to cocked it.
why?
thank you
markus
All Replies
Did you reassemble the trigger assembly correctly? And did you put the three springs back in correctly? I recently removed my safety and one of the springs popped out when I removed the cover plate and I never noticed it until I saw the spring on the floor. Also my rifle was finnicky about cocking and misfired a few times initially until I had worked it a few dozen times. I still wonder why it did this, maybe springs have to seat correctly or something.
Anyway, take a look at the diagram that I got from quick reference section. You might want to search theat section since your answer might be there.
I had that happen to me when I took my safety out also. I had to move one of my springs and also used the other spring that laid sideways in front of the safety. I bet if you turn the gun over when you cock it, out will lock.
- You must be logged in to reply to this topic.
Markus,
Try moving the spring on the sear, the one on the blue part on Lurkers above diagram, forward closer towards the sear/hammer engaging tip.
Regards,
Roachcreek