safety removal
can anyone point me in the right direction? i can find anything on the quick reference,
i got used to my talon without the safe, and now when i shoot my condor
i try to shoot with the safe on all the time thank you
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
I decided to remove the safety on my rifle today. First I removed the safety lever and the two springs!
This wound up with a gravity activated safety. @ first I thought this was OK, but it was just a nuisance. Had to point the muzzle down to cock with the safety off!
I was a bit squeamish about driving the pins out of the frame. I have a pin punch, bought to remove the sight from my rws 34, so used it to remove the frame pins. After looking close, I could see that the pins were bigger on one side than the other. I was amazed at how easy they drove out.
I should have done this a long time ago! I just need to get out the habit of releaseing the safety now.
I wont miss the safety by no means, my cz 452 and remington 700 safety have never been used anyway?
I’m thinking about doing the Trigger mod now?
Sam 😉
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Do it Sam, don’t be sceered 🙂