Scope cap mil dot chart
Does anyone have an existing jpeg or word file to use to print out an inside the scope cap holdover chart? Thanks.
wolfeman 😀
All Replies
Viewing 1 replies (of 1 total)
Viewing 1 replies (of 1 total)
- You must be logged in to reply to this topic.
Wolfeman, go to the Hawke scopes site and down load Chairgun. It is a little clunky to learn but, it will print out the scope cap holdover charts that you need.
When I say clunky, you have to watch out for Chairgun to change some of the info that you have aready put in as you add more info. That is, as you add the BC, the mag can change ect. I haven’t noticed Chairgun doing this in a while, an update might have fixed that problem.
To get the most accurate charts, you need to add your gun’s cal, the muzzle fps and the 50 yard fps, if you can get it. Chairgun will also want the scope height (centerline difference between the scope and the barrel).
Click on TOOLS, Calculators, calculate BC from velocity difference and then put the muzzle fps and 50 yard fps in the boxes. Once you do that, Chairgun will add your BC and you can print out range cards, scope cap holdover charts ect.
Click on the Reticles box and check the reticle that your scope has. You will also need to tell Chairgun what magnification you are using.
IF, you plug in accurate numbers, Chairgun works great! I have the Chairgun Iphone app and I use it a lot when out in the field.