Screwing tank clamps
Hi,
I know it is important to screw tank clamps at certain pressure in the tank. Some people recommends 120 bar and some 180 bar. Can someone shed some light on that?
All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
more info on POI shift, http://eng.kalibrgun.ru/forum/index.php/topic,328.0.html
where my friends Jan and Sir Ville helped me out. 
Also the barrel to the receiver body needs to be let out a bit, not butted against.
Stock screw tighten and then backed out buy 1/4 – 1/3 turn out.
~ GKU
You need to fill your air tube to at least 160 bar.
I learned Russian 3 year on basic school and it is loooong time now. I use google too. It need time to study. I think translate to Polish is not so strange 🙂
There is a one guy who had the poi shift and he elaborate with second screw point for cricket till then buy another cricket (russian made) first one was from Czech factory. Sedond cricket has poi shift too not so big than first but had…
Could you give us the summary? The translation really sucks and I can hardly understand anything.
I think there is a many crickets which suffer with POI shift due to different tighten barrel & tank clamps. I have had already elaborated with my too. It is weak point of cricket IMO.
Russaian guys are preparing second fixing point for stock and properly tighten barrel & tank…
http://forum.kalibrgun.ru/index.php/topic,3011.0.html
http://forum.kalibrgun.ru/index.php/topic,3991.0.html
use google translator to eng.
Usually you tighten them at midpoint of your current full and empty numbers.
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
This will fix it
http://www.talonairgun.com/forum/viewtopic.php?t=31073
Sent from my Z10 using Tapatalk