shoooooosh!!!!!!!!
i know this is a question that gets asked alot how do i make my ss silent ?? i have seen many different post about this topic, i hope that im not treading on anyone s fingers or that if posting this that i break any forum rules and or laws but this works well and cost about 5 dollars and about 30 min of time and is silent!!! all you hear is the hammer slap. i used a 50mm water pipe, its soundless water pipe no joke, so it slightly thicker and heavier than standard plastic pipe, it was an off cut from the local plumbers stor and cost me nothing, electrical tape, foam which is use for insulating hot water pipes and i got that at the same stor and the bottom ends of a aluminum, beer/soda can drilled out and cut from the can. the key is to use the tape in two places on the barrel so it hold in line with the barrel first i wrapped tape around 10 to 15 times then strips just for the sides from the rail till rail, count each piece you stick on so its even on both sides once it is circular
i taped all the way around 10 15 times again i had to layer the tape on the sides to build it up then tape the whole way around so theres no blow back. if you just wrap the tape around it becomes elongated and air can escape from the sides i have knocked the tubing on many things when im in bush and it has never moved out of alignment once i can pick up the gun by the sound suppressor so it does hold well. and its easy to twist the pipe off for transportation.. the foam is a hollow tube comes in 1 meter lengthe and is 45mm thick i used gaff tape around so it fits tight in the tube i used this to hold the baffels in place and they go all the way through you can cut it as short or as long as you like i have 7 beer can ends baffles inside but you can use as many or less as you want i hope the pictures come out and i hope you try it cause it do work !!!!!!!!!!!!!!
[img]http://i1127.photobucket.com/albums/l639/whazzzzup/Photo0367.jpg[/img] [img]http://i1127.photobucket.com/albums/l639/whazzzzup/Photo0370.jpg[/img][img]http://i1127.photobucket.com/albums/l639/whazzzzup/Photo0369.jpg[/img][img]http://i1127.photobucket.com/albums/l639/whazzzzup/Photo0368.jpg[/img] 😈 😈 [/img]
All Replies
Viewing 1 replies (of 1 total)
Viewing 1 replies (of 1 total)
- You must be logged in to reply to this topic.

What your describing is a basic silencer/suppressor/moderator. Many designs available on the the internet.
It seems like your asking for information on them but then post about your homemade device? If you do want information I would start on the wiki page and then search for “silencer plans firearm” or “suppressor plans firearm” on Google.
EDIT: Nevermind, I see what your saying now. Think you should post this in the Mods section with a more descriptive title and working pictures.