Showin’ what I’m rollin’.
I’ve got to thank RiffRaff for the 17″ .20 barrel and pellets… Yellow for the trigger work… WOK for the butt and the powdercoat… CollectriC for the knob… and Tony for the 24″ .25 barrel that is not installed.
Still working on getting air… haven’t been able to shoot the beast much.
Scope is too big I know, but it looks better set up with 24″ barrel and bipod for bench shooting. 😉
All Replies
Hate to hear about Leonard and Mindy separating. Either way, I just hope someone public holds onto that Max90. The fire station would be a long shot for me. 😛
After the tank cooled it was at about 4100, I didn’t pay attention to it warm. I had a small leak in the threads of my adapter also. I will take the sucker apart and retape it and hope that does the trick. One Condor fill and a top off and it’s down to about 3500 pounds.
No problem on borrowing your adapter man. I’d hate to be buggin’ on you every time I needed a fill.
Yeah, Leonard was foaming at the mouth when I took one of my SS’s up there one time when I got a fill. He’ll really get a charge out of the DAQ. I don’t know whats in store for the shop though. I just found out today there is a divorce being filed between Leonard and Mindy. Cary, who filled for you is going to buy her part out, just don’t know if he will keep the same location or not. I’ll let you know if something changes drastically.
I guess I should have told you that the adapter would need to be a DIN to Yoke adapter, but did not know you were going to buy one. Hell, ya should have hollered and I could have just left mine up there for you to use.
I’ll bet Cary got you real close if not all the way to a 4500psi fill. I hate when Leonard does the filling, he’s scared of them and won’t go over 4000psi, usually about 38-39 hundred psi. Thats mainly why I started going to the fire dept to get fills, plus they are free…. 😆
You caught me. Your buddy filled it for me. I’m going to have to tote the DAQ up there when it arrives so Leonard can gets a looksy. 🙂
I bought my own adapter but ended up getting one for DIN300. They couldn’t fill DIN so I had to swap it for a Yoke and make another trip. Yeah I got it filled, finally. 🙂
Hey Brandon, I got a report that you were over here poaching some air from my scuba shop in town…….:lol:
You get that tank filled finally ? I take it that their adapter worked A-OK on your tank to fill it ? If they used that brass one, I’m surprised to hear it worked. The stem is too short to work on my bottles, thus the reason I had to buy my own adapter to take out there for them to fill for me.
GunS and boobS!
Ya! what was this tread again, scopes or tits?
I’d put my breasteses up too if they look that good.
oh the hell with it….
Yes! Thank you!
Thank you 😀
Can we get an Amen on that Brothers 😛 😈 😀
Very Nice Setup AP 8)
Peace,
ASMALLVOICE
Followed by a Hallelujah 😆 😆
If your scope looks big enough to score a home run, it just big enough 😛
Can we get an Amen on that Brothers 😛 😈 😀
Very Nice Setup AP 8)
Peace,
ASMALLVOICE
Followed by a Hallelujah 😆 😆
If your scope looks big enough to score a home run, it just big enough 😛
You should put that in museum NICE real nice.
I think mine came from Brownells but I’m not finding them there. Midway has packs of 12 available. You’ll need a 10/32 tap.
http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=664961
- You must be logged in to reply to this topic.
I’ve got the LeMak stock from vhag due here tomorrow. Until then here are some more pictures of my .25 Condor. I think they look pretty menacing. Soon to have a larger shroud also. These guns are fun!