Shroud dimensions for P12
Maybe I’ve missed this.
Do anyone have the dimensions for the shroud on the P12. Inside diameter and length available for baffles ?
Thanks
Paul
All Replies
Viewing 5 replies - 1 through 5 (of 5 total)
I build silencer on a regular basis. I normally make my baffles from Delrin, but on occasion I do them in aluminium. I want the usable length to work out and build a few baffle combinations as far as shape, length, etc goes.
Paul
ps. I add photos of a regulator that I have designed and are currently been build by myself. (dimesions for P12)
well, you could do it the cheap way. take a 1/2 steel rod and cut it into 3/4″ lengths and find washers that can be milled down to the same outer diameter. mike hasnt released tech specs yet so it will be very difficult to tell until more people have the hardware in hand. im more then willing to send ou dimensions both depth and width of whats useable when i get mine sometime next month.
not sure when you are scheduled to get yours but if i get mine first i will let you know
Reaper
I stay in South Africa and we can not import form USA. I make all my own stuff, for myself I do not sell, hobby. I have already made de-pinger for my four guns that is on there way. Also busy building a regulator, own design.
I will be making baffles, again own design, but would like to start while the guns are on the water.
Paul
baffles and shrouds are still under development at this time and should be available when the rifle shipment comes in next month.
the problem is that the tolerances are soo precise and the balance must be perfect or you end up with un-even pressure inside the baffles which can cause accuracy problems and possible clipping.
mike has posted in the update thread pictures of the new shrouds. the s and the sq (s for silent, sq for stupid quiet) which are still under development and should be available shortly for purchase once things get rolling faster and the shipment comes in
Viewing 5 replies - 1 through 5 (of 5 total)
- You must be logged in to reply to this topic.
Some more work on my regulator. Fitted split ring and end O-ring.
Paul
