Side Cocker
Lang did a side cocking mod’ for me..
Also has new breech with cocking knob going all the way through it.
Very pleased so I am
:D[/img][/img]
All Replies
Viewing 11 replies - 1 through 11 (of 11 total)
Been sitting here thinking about how cool that is, no more burs on the frame from the 1/4″ diameter cocking knob, i like that setup.
It has no detrimental effect anywhere, the gun shoots the same as it did before. 🙂
The more i look at it, the more i like it. 😀
That’s pretty damn cool. 😀 Does it have a negative effect on frame strength? I thought if it could be relocated to the side, but have the knob in a slot that is not open on the end would be a great factory change, but way too much work to retrofit. Knob on the left, breech only open to the right. I don’t know if filling in the breech would even be possible. They should have done something like this in the beginning, i don’t understand their center slot, open on both sides method. Ambi yes, strong no.
Allmost like a AR -15
test
😆 😆
Big enough tits on that bitch!!!
Thanks Grit’ 😀
Much more natural to cock, even easier than it was before too 😀
I like! It would be a nice mod to add for aesthetics! I surly would want one! Nice Job Lang!
Viewing 11 replies - 1 through 11 (of 11 total)
- You must be logged in to reply to this topic.
Bear in mind that the slot doesn’t need to be that wide if you’re using a standard breech. Mine and Pab’s are like it because I used a custom breech on them, the shaft goes right through and has the barrel passing through it. It could have been narrower nonetheless but I wanted the strength.