skeleton stock ?
where i can buy a new stock for the cricket ?
if anybody know an website please answer me
All Replies
Viewing 12 replies - 1 through 12 (of 12 total)
Thank you sir!
Funny thing about search engines, they only find things when you put in the terminology others use. Oy, “screwed” by “bolt”… :whistle:
ok well i measured mine.. M5x0.8 x 16mm length cap screw
also i knew this had come up before… read this thread here
the search engine is your friend!!
http://talonairgun.com/forum/viewtopic.php?f=33&t=29515&p=298996&hilit=stock+screw#p299037
I much appreciate you doing that Jaime.
There was a thread on here somewhere with the size…
anyhow i have both screws… I will measure the skeleton one later today and let you know the length.
you should be able to get one at the local hardware store.. Its not very long at all. cause the skeleton stock uses a insert in the wood where the cap screw sits.
That’s a definite yes.
The skeleton screw length needed is about 1/3 the length of the synthetic stock screw. Plus, the synthetic screw is a flat head, and the skeleton needs a standard socket head.
if anybody know an website please answer me
WildwestAirguns.com
Matt, do you know if the skeleton stock needs a different screw than the one on the synthetic?
I got the stock but my gun is out for tuning so has not got chance to try it, and was wondering from other post if I need different screw to fit it.
Awny
I just got one last week from WWAG.
Its one size skeleton short stock that fits both the 22 and 25 now.
Awny
no way to get one ?
if anybody know an website please answer me
WildwestAirguns.com
Cricket skeleton stock is no longer made.
??????????????????????????????????????????????????????????????
Viewing 12 replies - 1 through 12 (of 12 total)
- You must be logged in to reply to this topic.
Thanks dman!