Slight Modification to NC Edgun R3 shroud

Hello All,

Midyear I asked Neil to make me a replacement shroud for my R3 .25 cal. He made me one almost like Hoots. A carbon fiber unit which screws onto the end of the barrel and hold every nice and tight.

Today I decided to add a small grub screw at the breech end so that the shroud will not unscrew from normal usage. My normal use I mean attaching and detaching the LDC. Think of it as a locking screw.

I used a #8-32 drill and tap as well as a #8-32 x 1/4″ set screw. Since the collar is aluminum, it was a snap.

I choose the 12 o’clock position so I had to cut down an allen key to tighten the set screw.

Just wanted to share if anyone is interested. Here’s my gun in all its glory 😉

thanks!!

Gabe G.