stealth
hi what do you guys call the stealth as I cant find a topic on the gun as I have a slight problem with the one I have just brought its blowing air out of the breach well I think its the breach or the valve on the bottle how do I find out were its coming from
many thx
All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
They been sporting an expiration date on the rather lengthy WARNING label for the past 5 years.
Well hell, use the ones with the expired warning label. Oh wait, you meant … Never mind
John
John,
They been sporting an expiration date on the rather lengthy WARNING label for the past 5 years.
I’m surprised being a Texan from the long horn state that you hadn’t noticed. But, you have to roll them all the way down to the twist tie near the end. Just like removing the straight rubber sleeve from the air tank, it puts a squeeze on it as it slides off. 😉
A GREAT SAFETY FEATURE 💡
Yeah, and if really freshand used, they will give off bubbles!
Also form Texas 😉
Knife
C’mon. This is the 21st century. Recycle those used condoms.
John
Lots of possible causes there.
Does the tank hold air when not mounted on the frame ❓
If not, the valve may have a bad o-ring or thedelrin valve seat may hav a problem.
you can place a balloon, unused rubber or plastic wrap over the valve end of the tank to detect a leak.
Next issue moving forward could be the tank not screwed in properly. If it could be done, I already did it 🙄
Next, if the breech isn’t pulled all the way onto the top hat, Yay, I did it several times when I wasn’t paying attention.
Then we come to the delrin breech. It needs 2 good o-rings inside it to work properly.
If you think any one problem is simple, you have yet to discover the other possible causes.
And, :tag: billboat10
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
Check this out: http://www.stealthresource.org/home.htm