Stealth mod adapter possition ..
I’ve been having a look at a Stealth for someone and so took it to the range for a few hours,
I had to rotate the mod adapter about a half a turn before I got the gun to group consistently (obviously clipping a little),
But the biggest improvement came when I pushed the adapter as far into the frame as it would go with the Weihrauch silencer attached (only about 20mm),
suddenly it was putting 5 shots well and truly into the same hole 😀
So my question .. Is getting rid of the small void in front of the barrel causing the better groups,
or is it a bad adapter period ?
Its the first time I’ve noticed this happen,
Thanks guys,
JJ.. 🙂
All Replies
Viewing 4 replies - 1 through 4 (of 4 total)
Sounds like pushing it into the frame probably centered it. Maybe the tolerances are a little sloppy on the adapter.
I was wondering if anyone else had found the same thing ?
Only im thinking of making an adapter,and am wondering if I should make a long one that goes into the frame and seals around the end of the muzzle,
I did the same thing with one of my Skans,
But being a differant gun an all ..
Don’t want to waste brass if I don’t have to 😉
JJ..
I think you should read what you wrote and draw the conclusion out of it.
Viewing 4 replies - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
Yeh maybe (its not one of mine 😆 )
Ive got it for a few more weeks before I give it back,its funny shooting someone elses gun,feels like i can use it as an experiment 😆
Don’t want to bugger up my own again 😉 😀
Il update when I get some more shooting done,
JJ..