StormPup .357
absolutely love this gun, shoots the JSB pellet in a rugged hole and in the 125-130 FPE range
here a video shooting the gun and checking for noise
http://i34.photobucket.com/albums/d124/NorthShoreLB/th_012-1_zpsee8aae70.jpg%5B/IMG%5D%5B/URL%5D
All Replies
Is there a way to cut back the frame opening at the front (to slide the shroud further on to the barrel) or is there something there that holds the barrel?
I’m thinking if this was possible you would have done it but I also realize it would be a pretty serious alteration which could hurt it’s resale value.
For some reason all this time I thought this things was semi-auto. 😯 Must be the way it looks. 😉
cannot compare, the Maurader is a 30-40 FPE gun, My Pup is 125-130 FPE with essentially a 4″ LDC that Neil doesn’t sure even raccomend, now get an 8″ LDc with the 2 1/2″ over the shroud slip and maybe we can start talking.
If you wanna order one from Neil so send to me I’ll test it 😀 😀 😀 😀
How silent is it with the 6 1/2″ LDC compared to the Mrod ?
I sware that thing looks like a belt fed squad light machine gun. 😀
Humm— Belt fed—– 💡
Those StormPups are basically a redressd Rainstorm, the Rainstorm Platform now has been out for a numbers of years having a proven reliability record, outstanding accuracy and great power, the new .25 barrels so far have outstanding reviews of great accuracy.
the future is bright 😀 😀 😀
Thanks, really like your gun. I just check PA and .22 is out of stock now. Good price.
Is the barrel threaded in factory?
the barrel is not threaded, the gun is shrouded, the shroud basically is a single 2″ baffel
What is the total length of that Clague LDC??
The total length of the gun now is 33″ right?
If I gt one I would probably add an inch or 2 to try for a little more ssshhh…
The Clague LDC is 6 1/2″, 4″ from the end of the shroud and 2 1/2″ slipping over the shroud, so yes the gun now is 33″ was 29″ stock
if you get a 8″ + the 2 1/2″ overlap it’s gonna make a real quiet gun, I might even order one like that too 😉
nice short powerful.
Is the barrel threaded in factory?
Hey Manny,
What is the total length of that Clague LDC??
The total length of the gun now is 33″ right?
If I gt one I would probably add an inch or 2 to try for a little more ssshhh…
Cool!!
Considering how hard it is shooting, it is not too bad :thumb:
I’m liking it.
thanks again NP,
Gabe G.
I could not open your video 🙁 I’m really interested in hearing your gun with the LDC. It looks like a Clague LDC?
I like the looks of it and the fact that it is accurate and relatively inexpensive.
How many shots are you getting per fill?
Thanks!
Gabe G.
here is 2 full Mags, 14 shots on the same fill from 200 BAR to 110 BAR
at 30 yards there’s hardly any change in POI
OK, lets see if the video link works
or try this
http://s34.photobucket.com/user/NorthShoreLB/media/012-1_zpsee8aae70.mp4.html?sort=6&o=0
Hey NP,
I could not open your video 🙁 I’m really interested in hearing your gun with the LDC. It looks like a Clague LDC?
I like the looks of it and the fact that it is accurate and relatively inexpensive.
How many shots are you getting per fill?
Thanks!
Gabe G.
shooting some groups today, the gun is sighted in at 25 yards, so at 35 is a tad high, back on it at 50
groups are at 35 yards
the 5 shots group was going well untill I pulled one left, got mad reloaded the mag and shot a 7 shots group below
later I wanted to retry the round ball, here is a comparison of the roundball to the pellet
I’m loving this gun more and moe,…Hogs beware 😉 😉
- You must be logged in to reply to this topic.
that can definatly be done, the reason I didn’t is because I only use the LDC for backyard shooting when I go Hunting I want my gun to be as short as possible, my type of hunting is one shot and done 😀 😀