Taipan Veteran Regulator Tester.
Well, I got a Taipan Veteran Short .25 and before to take it apart I would like to know if the Huma Regulator Tester is good to fine tune the Taipan Veteran regulator.
Thank you for your help. :biggrinn:
All Replies
Viewing 10 replies - 1 through 10 (of 10 total)
Did you get that from John Hagan? I need more tools.
Mike
From John Hagan? Test it?
I got one.
Attachments:
Thanks but I already wrote to John Hagan ….
I have one – 70eu + shipping if you want
Taipan Veteran Regulator price?
Holy S***t!!
I just saw my Taipan Veteran Regulator and shows 153.
That’s too much!
I really need a regulator tester for this beast.
It’s design for their short regs and to minimize air waste while testing, it might fit looks very close ?
But you might want to contact Huma and ask them first.
If not John makes mighty fine reg tester for PCPs …..
John Hagan
hagantool@aol.com
~ Greg
Thank you so much, I will try to contact John.
If you can fit the reg in the tester with it’s longer tail length you should be good to go.
It’s design for their short regs and to minimize air waste while testing, it might fit looks very close ?
But you might want to contact Huma and ask them first.
If not John makes mighty fine reg tester for PCPs …..
John Hagan
hagantool@aol.com
~ Greg
Viewing 10 replies - 1 through 10 (of 10 total)
- You must be logged in to reply to this topic.
Did you get that from John Hagan? I need more tools.
Mike
Yes, I did.